Product introduction
DK YQM-10000 Synthetic wavelength CW fiber laser is consists of the mainframe and cooling system. The mainframe of the laser consists of some laser units and spectrum synthesis modules.
The laser unit is of 4000W power, and DK-YQM is combined by three laser units. The combine efficiency is between 92%~95%, and the output power is over 10000W, and the center wavelength of the three 4kW units are: 1050nm, 1065nm, and 1080nm. The spectral width of every unit at 20dB is below 2nm. Two Dichroic mirrors are used to build the key unit in the combiner module. The light path of the synthesis is as follows.
Main functions
♦With high-energy laser output
♦With laser output power adjustment function
♦Can emit low-power calibration laser beams
♦Collimated laser beam output
♦Cooling for laser machine and collimator
♦Provide two control modes: local control and remote control, both modes provide hardware light emission or software light emission trigger mode
♦It has the functions of monitoring working status and real-time monitoring of power output
♦Fault detection and location functions
♦Fault alarm, light emitting indicator, etc
♦Provides two communication control interfaces: TCP/IP network and RS485 serial port
Product specification
| Optical Parameters | YQM 10000 |
| Operation Mode | CW/Modulation |
| Polarization State | Random |
| Beam Quality(M2) | < 2 |
| Output Power | ＞10000W |
| Power Range | 10%~100% |
| (RMS) Output Power Instability | ≤ 2.0% |
| Spectrum Range | 1050 – 1080nm |
| Operating Voltage | DC 120V or AC 380V |
| AC supply frequency | 50 – 60 Hz |
| Laser Power Consumption | ≤36kW |
| Continuous Emission Time | ＞200 s |
| Communication Protocol of Upper Computer | TCP/IP or RS485 |
| Cooling | Water Cooling |
| Operating Temperature | -10℃~40℃ |
| Storage Temperature | -15℃~60℃ |
| Relative Humidity | 20%-80% |
Product Tags:
|
|
CW CS Fibre Laser Source 10kw Synthetic Wavelength Images
|
